Model 3 / Y Dome Light Cover - Carbon Fiber Interior Mods
$37.99
Precio de oferta $37.99Precio habitual $72.99
Shipping calculated at checkout
Real carbon fiber overhead-console trim
Frame the dome-light console in real carbon fiber.
A thin, vehicle-specific overlay adds a genuine carbon-fiber surface around the overhead lights and controls—without replacing the factory console.
Real carbon fiber
Generation-specific fit
Pre-applied adhesive
Glossy, matte or forged
Why this version
The carbon look without a printed-plastic substitute.
Made from real carbon fiber, each vehicle option follows its own overhead-console shape and includes the correct number of covers for that generation.
01 — MATERIAL
Real carbon fiber
Made from real carbon fiber—not ABS plastic with a printed carbon-fiber pattern.
02 — FIT
Shaped for the selected console
The cutouts follow the dome-light and overhead-control layout. Select by vehicle generation, not by finish alone.
03 — INSTALL
Overlay, not replacement
Pre-applied double-sided adhesive secures the trim over the factory surface; no drilling or console disassembly is required.
Fitment and package quantity
Choose the vehicle option before the finish.
Select your vehicle first. Each option follows a different overhead-console layout, and the number of included pieces is determined by that layout—not by product size.
Vehicle option
What arrives
Model Y 2020–Present, including Model Y Juniper
1 dome-light cover for the selected Model Y generation.
Model 3 2017–2023
2 dome-light covers. Both pieces shown for this generation are included.
Model 3 Highland 2024+
1 dome-light cover shaped for the refreshed Highland overhead console.
Before ordering: choose your vehicle instead of leaving the selector on “Please Choose.” Fitment is determined by the overhead-console shape and generation; left- and right-hand-drive vehicles do not require separate options.
Choose the finish
One material, three visual treatments.
Match the finish to the carbon-fiber trim already in your cabin and to the amount of reflection you prefer overhead.
Glossy
Deep shine, defined weave
The classic woven pattern appears more reflective and prominent under cabin and daylight.
Matte
Lower-reflection weave
A quieter surface that keeps the traditional carbon pattern visible without a mirror-like highlight.
Forged
Irregular technical pattern
A broken, marbled carbon appearance rather than the uniform diagonal weave of gloss or matte.
Before installation
Confirm the fit before peeling the liner.
Hold the cover against the factory console first. The perimeter and every light or control opening should align before the adhesive is exposed.
Check the package: Model Y—including Model Y Juniper—and Model 3 Highland options contain 1 cover. Model 3 2017–2023 contains 2 covers.
Check the finish: make sure the glossy, matte or forged surface matches the option you selected. If the cutouts do not align, do not remove the adhesive liner.
Product facts
What comes in your package.
Material and finish
Real carbon fiber in glossy woven, matte woven or forged-carbon appearance.
Model Y 2020–Present
1 piece · Compatible with Model Y Juniper · Choose glossy, matte or forged carbon fiber
Model 3 2017–2023
2 pieces · Choose glossy, matte or forged carbon fiber
Model 3 Highland 2024+
1 piece · Choose glossy, matte or forged carbon fiber
Installation
Test-fit first. Peel only when alignment is clear.
Confirm the part and orientationCompare every cutout with your overhead lights and controls. For the two-piece Model 3 set, identify both locations before removing any liner.
Clean and fully dry the factory trimRemove dust, oil and interior-dressing residue. Adhesive will not hold reliably on a damp or contaminated surface.
Test-fit with the liner intactCheck the perimeter gap and make sure every light, sensor and control opening remains centered.
Peel, align and place onceRemove the adhesive liner, hold the cover by its edges and lower it into position without stretching or bending the thin carbon piece.
Press the perimeter evenlyApply firm, even pressure around the adhesive areas. Avoid repeated removal and repositioning, which can reduce adhesion.
Installation method: the gallery shows pre-applied double-sided adhesive. This is an overlay installation; no drilling or removal of the factory overhead console is required.
Before you order
Dome-light cover FAQ
Is this real carbon fiber or carbon-look plastic?
It is made from real carbon fiber. Glossy and matte use a woven appearance; forged uses an irregular carbon pattern.
Why do some vehicle options include one piece and another includes two?
The package quantity follows the overhead-console layout for that vehicle generation. Model Y 2020–Present—including Model Y Juniper—and Model 3 Highland 2024+ include one piece; Model 3 2017–2023 includes two pieces.
Does it block the dome lights or overhead controls?
The cover is cut around the original light and control openings. Correct variant selection and careful test-fitting are essential; do not install if the openings do not align with your console.
Does installation use adhesive?
Yes. The product gallery shows pre-applied double-sided adhesive strips on the underside. Clean and dry the factory surface, test-fit first, then peel and press the cover into position.
How should I clean the finish?
Wipe gently with a soft damp microfiber cloth, then dry. Avoid abrasive pads, harsh solvents and force around the thin edges.
What should I know about returns before installation?
TESERY's current policy requires a return request within 30 days and the product to be unused, in original condition and in its original packaging. Installed, modified or removed products may be declined if their condition cannot be verified. Inspect the finish, quantity and fitment before peeling the adhesive liner, and review the current refund policy.
Confirm the overhead-console shape, then choose your finish.
Vehicle generation first; glossy, matte or forged carbon second.
If you qualify for sales tax exemption, please submit your exemption details and supporting documents. Our team will review your request, and once approved, your account will be updated to receive tax-exempt checkout on eligible purchases.
