Exigo™IV Hydro-Action® Sewage Treatment Units

 Hydro-Action Industries Aerobic Onsite Wastewater Treatment. Tested and Standard (Class I) Certified 40 by ANSI/NSF.


Meet the AP-500 Aerobic Treatment Unit (ATU), the heart of our wastewater management system.
It learned to clean wastewater from the best teacher around: Mother Nature herself.
Just as waste breaks down organically from air, the aerobic bacterial action in our ATU uses oxygen to treat 
wastewater.
The Break Down—Naturally
The Hydro-Action system outperforms traditional septic tanks in prolonging drain field life, meeting environmental
requirements, and handling issues like poor soil or high groundwater.

     How it works:

    The Hydro-Action ATU Prepares Wastewater. 
    Before wastewater enters the ATU, it runs through the pretreatment or septic tank. Pretreating reduces the amount
    of solids and other materials that can get into the system. The system’s flexibility allows the ATU to be added to
    an existing septic tank or used with the Hydro-Action system alone.
    Processes Effluent
    When effluent arrives from the pretreatment/septic tank, the ATU gets to work. The Aeration Compartment is why
    the ATU blows traditional septic tank technology right out of the water. A pump injects air into the system, 
    pushing it down Flexible Air Lines and through the Anchored Diffuser Assemblies (patent pending) to the
    compartment, where oxygenation begins. There, aerobic bacteria are force fed oxygen and multiply, cleaning the
    wastewater
    without chemicals and filters.
    Creates Clear, Odorless Effluent
    Oxygenated effluent then enters ATU’s Clarification Compartment, a conically- shaped area that separates clarified
    water from any remaining solids, which settle and return for further aeration. Effluent arrives and leaves the
    Clarification
    Compartment by hydraulic action, and from there it enters the dosing tank, field or mound disposal
    system without
    any worries about bio-matting. With wastewater management, prevention counts. Our OPS®, or
    Operations control
    center, alerts the user through visual and audio signals if the system becomes too full or air
    pressure drops to
    unacceptable levels, so a certified installer can be contacted for maintenance.